Analog FXS Line 4 Port 3G Fixed Wireless Terminal with 4 FXS

• Type: WCDMA
• Usage: Telephone/Billing System/Alarm System/PBX/Gateway
• Condition: New
• SIM Card Slot: 4
• FXS Port: 4
• IMEI Change: Support
• Model NO.: ETS-4S
• Caller ID Display: Support
• Lcr(Low Cost Routing): Support
• SMS Management: Support
• Lock Network Operator: Support
• Number Transfer: Support
• Warranty: 1 Year
• Trademark: Etross or OEM Brand
• Origin: Guangdong, China
• Production Capacity: 10000 Pieces/Month

Product Description

1.General Description

WCDMA 3G FWT ETS-4S is a newly designed 4 ports WCDNA to POTS (Plain Old Telephone Service) line Converter, also known as Fixed Wireless Terminal. The device has 4 line connections that allow 4 regular analog telephones to be connected to 4 Cellular WCDMA service just like connecting to 4 local PSTN (Public Switched Telephone Network) land-lines. Your calls are connected on the 3G network. This device receives and makes phone calls.
 
Model WCDMA FWT ETS-4S is 4 WCDMA modules + 4 FXS ports.

2.Functions & Features

*Brand Name: Etross or OEM
*Model Number: ETS-4S
*Type: WCDMA FWT ETS-4S
*Port Number: ETS-4S:
*SLIC(FXS): 4
*SIM Card slot: 4
*IMEI changeable: support
*LCR(Low cost routing): support
*SMS management: support
*lock network operator: support
*Number transfer: support

1)Use advanced Silicon Lab slic (FXS) and DAA (FXO) solution, the compatibility and the voice quality are in the high-level standard.
 
2)The digit dialing prefix establishment function
 
3)The digit dialing length establishment function, the user does not need in the digit dialing to join finally#
The number may also realize the fast digit dialing
 
4)Number transformation function
 
5)Number Canada dials the function
 
6)The operator locks the function
 

3.Installation and Connections

1)The 3G FWT ETS-4S has to be in an area with a good 3G network coverage.
Poor signal may affect the quality of the voice.
2)Insert the SIM card into the SIM card holder at the back of the 3G FWT ETS-4S.
3)Connect the antenna. In order to ensure a good quality of voice, it is recommended to locate the antenna at least 1.5m from the telephone and from the 3G FWT ETS-4S.
4)Plug the RJ-11 cable to the back of the 3G FWT ETS-4S marked as FXS (1-4) and the other end to your telephone.
5)Plug the Power Adapter to the wall power socket and its 12v plug to the Power (PWR) connector on the back of the 3G FWT ETS-4S.
6)Your Telephone will ring twice when the 3G FWT ETS-4S has completed the boot process, it takes about 5 seconds.
7)You can make and receive calls after you can hear the Dial Tone on the telephone and Network Signal indicator (WCDMA) is ON.

Detail Image