8 Channels/ports Asterisk PCI analog Card FXS/FXO (800P)
Model No: 800P
Brand: Etross

800P is 8 ports FXS/FXO analog Asterisk PCI card which is mainly applied to PSTN environment.
It supports all functions of Asterisk PBX system needed.

Features:
High security: It adopts tertiary thunder preventing technology, can prevent
The thunder and lightning from striking effectively.

Extensive applicability: Any global standard interface of phone line is available.

Users can choose any of combinations of FXO_200 or FXS_200 modules
According to their requirements.

32 bit bus master DMA data exchanges across PCI interface at132Mbytes/
Sec for minimum host processor intervention.

The high stability of firmware is exported / imported with DMA data exchange, so
It lightens CPU's load greatly. Under the environment of the same hardware,
The application rate of CPU is equal to 4 channels analog card.

It supports all functions of Asterisk PBX system needed.

Safe designed: No weld legs are on the backside of our module. Smooth
Bottom module couldn't hurt user's fingers. However, most of modules use

Dual-in- line so that some sharp weld legs are lefon the backside of module.

Working hardware and software:
Interface: PCI 2.2
CPU 800+MHz
128+MB
Linux
Kernel
2.4. X or 2.6...X

Size and Weight
Size(L*W*H): 214*105*12MM
Weight: 218g

Working environment:
Temperature Operation: 0 to 70° C
Temperature Storage: -35° C to 120° C
Humidity: 10% to 90% Non-condensing
Voltage: 5V/12V
Power Dissipation Mas: 2.85W/26.36W

Disclaimers: Digium® Is registered trademark of Digium, Inc
Asterisk® Is registered trademark of Digium, Inc<, o: P>